How to Install a TV Antenna Amplifier?
- Issue Time
TV Antenna Amplifiers are designed to boost the signal received by the antenna that powers your TV. Read on to learn the common steps for installing a TV antenna.
We all want to watch TV, right? Countless hours have been wasted looking at the Rectangular Light, which showcases sights of the world we can only hope to see with our own eyes. Family and friends gather around the TV to watch the latest episode or their favorite team's heart-wrenching game. Uniting people across the globe, this venerable television is a time burner and ancillary chip for the hungry. What if the signal is bad?
Many things can cause poor TV reception. The installation of the antenna may be wrong. Maybe some mongrel rats chewed up the wires, causing the signal quality to drop. Or simply, you have an old/broken TV screen. Sometimes, however, the whole system is pristine, but the reception is still not satisfactory. If the problem persists, a TV antenna amplifier may be the solution to the reception problem.
What is a TV Antenna Amplifier?
As the name suggests, TV antenna amplifiers are designed to boost the signal received by the antenna that powers your TV. This amplifier uses electricity as a kind of starter to boost the signal picked up by the antenna. This allows the signal to travel farther.
The most important thing is that the existing antenna is already receiving the signal. An amplifier must have something to amplify. Besides that, the amplifier would be another useless piece of technology connected to the antenna.
Check for existing signals.
Note that a TV antenna amplifier is not a universal solution to reception problems. As always, contact a professional near your area to diagnose your TV and TV antenna. You don't want to buy an amp only to find out that it doesn't solve your problems.
Another term for a TV antenna amplifier is a preamplifier. It can also be called an antenna booster. Always consult a professional or read the manual to avoid confusion.
How to Install a TV Antenna Amplifier?
Here are the usual steps for installing a TV antenna/preamplifier
Step 1: Gather Materials
Just like any other process. The first step should always be about the material. Materials that may be required for this activity are listed below.
- TV antenna amplifier itself
- TV cable (coaxial cable)
- Clamps (e.g. U-bolts)
- TV plus antenna
- Power injector or power supply
Coaxial cable is recommended, but the copper-plated cable will work too. The only problem with copper plating is that it may not work as well at long distances. Use a coaxial cable if available.
Once you have accumulated the above items, you can now complete the remaining steps. Double-check the condition of each item on hand to ensure a smooth installation.
Step 2: Actually Installing the TV Antenna Amplifier
The following steps must be performed in order:
- TV antenna amplifiers must be mounted as close to the antenna as possible to ensure optimum operation.
- Connections vary, but in this case, the amplifier is connected to the mast. Use the clips to secure the TV antenna amplifier to the antenna mast. In this case, the U-bolt connector is lifted.
- Connect the cable (coax or copper plated cable, whichever is available) between the antenna and the TV antenna amplifier.
- The end of the cable connected to the TV antenna amplifier should be plugged into the INPUT port. Different brands may use different terms for the INPUT port.
- Get another cable (again coaxial or copper plated) and plug it into the other port on the TV antenna amplifier, the output port. Likewise, brands may have different labeling systems, which may even vary from country to country. This port is named TV OUT here. This will be the cable that runs from the outside of the house (or the building where the antenna is) to the inside of the house.
- Another important component is the power injector or power supply. Install it inside the house (or building).
- No other equipment should be inserted between the TV antenna amplifier and the power injector/power supply. Failure to do so may result in voltage blocking. As mentioned above, TV antenna amplifiers rely on electrical charges to amplify the signal from the antenna itself. Blockage can result in an 80% drop in signal.
- The cable connected from TV OUT (output port) must be connected to a power injector/power supply. The above cable must be plugged into the From Ant port of the power injector/power supply. Also, some brands may have a different naming system, so be sure to consult the manual or call customer service when in doubt.
- A port in the power injector/power supply is named To TV. Another cable should be connected to this port. The other end of the cable should connect to your TV or splitter.
- Care should be taken when using splitters as the signal may deteriorate. A splitter is a device used to split a received signal for use by multiple television screens. Adding a separator makes the overall system more complex. This means adding another place of failure. Make sure the separator is installed correctly.
That's it. If you get to this stage, you've done most of the work. If all goes to plan, you can now enjoy your TV with family and friends.
Step 3: Testing Phase
As with all activities, testing is essential to discovering whether you are successful or not. This is where you determine if you have done everything correctly.
- Make sure the power injector/power supply is powering the TV antenna amplifier.
- Turn on the TV.
- Measure if your reception is better than it was before installing the amplifier.
Step 4: Troubleshooting
If the reception is better then please give yourself a pat on the back. Sometimes reception remains the same or worse after installation. The following are simple troubleshooting tips to resolve issues with poor reception.
- Overdrive your amp. This can only be done if there is a TV station nearby.
- Check that the power injector/power supply is powering the TV antenna amplifier. The problem usually occurs if a device between the power supply and the amplifier is not relaying power.
- FM and other types of signals may be TV signals. Some amplifiers have the option to block FM signals. If this option is available, turn it on.
If the problem persists, it is recommended to seek help from professionals in the area. Due to its technical nature, beginners and novices may find it difficult to install the system. Great care must also be taken when mounting the amp as it requires climbing up. If you want to buy a TV antenna amplifier, please contact us, our professionals can provide you with professional advice.
SOMI is a professional custom antenna accessories manufacturer. We are the leading supplier of CATV amplifiers, wire connectors, CATV splitters, satellite splitters, CATV wall sockets (terminal boxes), and other high-quality CATV system accessories, audio video connectors and connecting cables Professional Manufacturer. We have our own engineers, so we can design and produce products according to customers' requirements. All products are produced by automatic machines and fully tested to ensure the quality of our products.
Satellite line in amplifier, 900-2200MHz, Alloy Zinc housing with nickekel-plated
Outdoor Trunk catv signal amplifier, Alloy Zinc housing, for catv use
China manufacturer| Outdoor CATV signal amplifier| 5-860 Mhz
TV antenna amplifier, aluminium housing, Gain 20dB , for catv use